Because the Coupe and Convertible are four-passenger cars, the rear seat passengers are treated to a center console between their individual rear seats which includes individual storage boxes, additional air outlet vents, and footwell lights.
The BMW 3 Series Coupe and Convertible come standard with Dark Burl Walnut wood trim. As a choice, Bamboo Anthracite wood, Light Burl Walnut wood, and Aluminum trim are optional. Like the standard Dark Burl Walnut, these materials appear on the dash, front and rear consoles, doors and rear side panels.
All-new turbocharged engine with Valvetronic for 335i
BMW 3 Series Coupe and Convertible customers have a choice of two inline-6 engines that are the worlds’ finest. The 328i features 230 horsepower while the 335i has 300 horsepower and is the first inline-6 equipped with a single twin-scroll turbocharger, BMW’s Valvetronic throttle-less intake technology, High Precision direct fuel injection, and all-aluminum construction.
The 335i’s new inline-6 engine displaces 3.0-liters and develops maximum output of 300 hp at 5,800 rpm, with peak torque of 300 lb-ft available all the way from 1,200–5,000 rpm. Redline is 7,000 rpm. This is the same level of performance as the previous 3.0-liter twin-turbo inline-6 but with the innovation of twin-scroll technology and the integration of Valvetronic, this new engine is even more fuel efficient.
Historically, BMW engineers were never satisfied with the most often-cited downside to turbocharging: the frustrating “turbo lag” that occurs between the time at which driver presses the accelerator pedal and when the turbocharger develops sufficient rotation to increase power. Turbo lag is usually worse at low engine speeds. Other drawbacks included relatively high fuel consumption and poor emissions output. At the time, turbocharger technology was not a reliable, practical or efficient was to make power. For these and other reasons, BMW put turbocharged gasoline engines on the shelf for more than 20 years.
For the Coupes: Available xDrive intelligent all-wheel drive.
The 2011 BMW 335i xDrive Coupe combines intelligent all-wheel drive with the power of BMW’s new 300-horsepower, turbocharged 3.0-liter inline-6 engine. Likewise, the 2011 BMW 328i xDrive Coupe will impress with its 230-hp, 3.0-liter inline-6 engine featuring magnesium-aluminum construction. On smooth, dry roads BMW’s xDrive gives a sporty, rear-wheel drive feel. But on a wet or snow-covered road, xDrive automatically sends more torque to the axle with more traction. BMW’s xDrive is the most sophisticated and responsive all-wheel drive system on the market today. It has proven its merits, in terms of agility and safety, in the 19 BMW models currently offered with xDrive in the U.S.
For the Convertibles: Sun-Reflective Leather offers cooler seats
BMW is the first carmaker in the world to use sun-reflective technology to mitigate temperatures on leather seating, armrest surfaces, headrests, and gear shifter. The process uses modified color pigments imbedded in the leather during the production process to reflect the infrared radiation of the sun in wavelengths of more than 720 nanometers.
This leather treatment is able to reduce surface temperatures on dark interior colors by up to 20 Celsius degrees (36 Fahrenheit degrees), and also offers advantages on light-colored upholstery, where the heating effect of sunshine is less severe, reducing the surface temperature by as much as 15 Celsius degrees (27 Fahrenheit degrees). All other qualities of the leather remained unchanged.
photo:BMW
The BMW 3 Series Coupe and Convertible come standard with Dark Burl Walnut wood trim. As a choice, Bamboo Anthracite wood, Light Burl Walnut wood, and Aluminum trim are optional. Like the standard Dark Burl Walnut, these materials appear on the dash, front and rear consoles, doors and rear side panels.
All-new turbocharged engine with Valvetronic for 335i
BMW 3 Series Coupe and Convertible customers have a choice of two inline-6 engines that are the worlds’ finest. The 328i features 230 horsepower while the 335i has 300 horsepower and is the first inline-6 equipped with a single twin-scroll turbocharger, BMW’s Valvetronic throttle-less intake technology, High Precision direct fuel injection, and all-aluminum construction.
The 335i’s new inline-6 engine displaces 3.0-liters and develops maximum output of 300 hp at 5,800 rpm, with peak torque of 300 lb-ft available all the way from 1,200–5,000 rpm. Redline is 7,000 rpm. This is the same level of performance as the previous 3.0-liter twin-turbo inline-6 but with the innovation of twin-scroll technology and the integration of Valvetronic, this new engine is even more fuel efficient.
 |
Historically, BMW engineers were never satisfied with the most often-cited downside to turbocharging: the frustrating “turbo lag” that occurs between the time at which driver presses the accelerator pedal and when the turbocharger develops sufficient rotation to increase power. Turbo lag is usually worse at low engine speeds. Other drawbacks included relatively high fuel consumption and poor emissions output. At the time, turbocharger technology was not a reliable, practical or efficient was to make power. For these and other reasons, BMW put turbocharged gasoline engines on the shelf for more than 20 years.
For the Coupes: Available xDrive intelligent all-wheel drive.
The 2011 BMW 335i xDrive Coupe combines intelligent all-wheel drive with the power of BMW’s new 300-horsepower, turbocharged 3.0-liter inline-6 engine. Likewise, the 2011 BMW 328i xDrive Coupe will impress with its 230-hp, 3.0-liter inline-6 engine featuring magnesium-aluminum construction. On smooth, dry roads BMW’s xDrive gives a sporty, rear-wheel drive feel. But on a wet or snow-covered road, xDrive automatically sends more torque to the axle with more traction. BMW’s xDrive is the most sophisticated and responsive all-wheel drive system on the market today. It has proven its merits, in terms of agility and safety, in the 19 BMW models currently offered with xDrive in the U.S.
For the Convertibles: Sun-Reflective Leather offers cooler seats
BMW is the first carmaker in the world to use sun-reflective technology to mitigate temperatures on leather seating, armrest surfaces, headrests, and gear shifter. The process uses modified color pigments imbedded in the leather during the production process to reflect the infrared radiation of the sun in wavelengths of more than 720 nanometers.
This leather treatment is able to reduce surface temperatures on dark interior colors by up to 20 Celsius degrees (36 Fahrenheit degrees), and also offers advantages on light-colored upholstery, where the heating effect of sunshine is less severe, reducing the surface temperature by as much as 15 Celsius degrees (27 Fahrenheit degrees). All other qualities of the leather remained unchanged.
photo:BMW
Article Gallery